Tailor Fabric Estimator

A 40-inch panjabi on 44-inch fabric needs about 2.5 goj. Pick the garment, length and width to see your estimate.

Garment to stitch
in

How long in inches from neck down (a typical panjabi is 38–44 inches)

Fabric width

Estimated fabric needed

2.5 goj

Garment
Panjabi
Length
40 in
Width
44 in
Fabric (in goj)
2.5 goj
Fabric (in metres)
2.29 m

For a 40″ Panjabi on 44″ fabric, buy ≈ 2.5 goj (≈ 2.29 m).

Approximate — fabric width and design vary, so confirm with your tailor.

How this was calculated
  1. Base: Panjabi (40″ long, 44″ wide) = 2.5 goj
  2. At 40″ long = 2.5 × 40/40 = 2.5 goj
  3. At 44″ width = 2.5 × 1 = 2.5 goj
  4. Rounded up to the next 0.25 goj = 2.5 (from 2.5)

How to use

  1. Pick what to stitch — panjabi, shirt, pajama, salwar or blouse.
  2. Enter the garment length in inches (a typical panjabi is 38–44 inches).
  3. Ask the shop for the fabric width and pick narrow (36″), medium (44″) or wide (60″) — the result shows goj and metres.

Formula

Cloth (goj) = base × (length ÷ 40) × width factor Base (40″ long, 44″ wide): panjabi 2.5, shirt 2, pajama 2, salwar 2.25, blouse 1 goj Width factor: 36″ → 1.25, 44″ → 1, 60″ → 0.75 Result rounded UP to the next 0.25 goj; 1 goj = 0.9144 m

  • Longer garments scale proportionally — at 44″ the multiplier is 44/40 = 1.1.
  • Narrow (36″) fabric needs 25% more; wide (60″) fabric needs 25% less.

Cloth per garment (40″ long, 44″ wide)

Garment Cloth
Panjabi 2.5 goj (≈ 2.29 m)
Shirt 2 goj (≈ 1.83 m)
Pajama 2 goj (≈ 1.83 m)
Salwar 2.25 goj (≈ 2.06 m)
Blouse 1 goj (≈ 0.91 m)

Worked example

44-inch panjabi on 44″ fabric:

Base 2.5 × 44/40 = 2.75 goj — already on a quarter, so the result is 2.75 goj (≈ 2.51 m). The same panjabi on narrow 36″ fabric: 2.75 × 1.25 = 3.4375 → rounded up to 3.5 goj.

What to know before buying

  • Verify the width: even if the shop says “44 bohor”, measure with a tape — short width means short cloth.
  • Allow for shrinkage: cotton shrinks after washing — tailors usually keep half a goj in hand beyond the quarter rounding.
  • Pattern matching costs: checks, stripes and large prints need extra cloth to align the pattern.
Details: how to measure the length

Measure panjabi/shirt length from beside the neck down — laying an old garment flat and taping it is most reliable. Measure pajama from waist to ankle. For a blouse, give the tailor the back length and sleeve length separately.

Leave a finger’s ease when measuring, and have the tailor verify doubtful measurements — once cloth is bought, the same dye lot may not be available again.

Frequently asked questions

What does fabric width (bohor) mean?

Bohor is the width of the cloth roll — measured across, not along its length. In Bangladesh cloth usually comes in 36, 44 or 60-inch widths. Narrow fabric needs more length for the same garment; wide fabric needs less.

How many metres is 1 goj?

1 goj = 36 inches = 0.9144 metres. So 2.5 goj ≈ 2.29 m and 2 goj ≈ 1.83 m. The calculator shows both.

How much cloth for one panjabi?

A 40-inch panjabi on 44-inch fabric takes about 2.5 goj. Taller lengths or narrow 36-inch fabric need more — enter your length in the calculator.

Do collars, sleeves or lining need extra cloth?

Yes — a wide collar, double pockets, contrast piping or long loose sleeves can add up to half a goj. A flared salwar needs more, and an inner lining (ostor) must be bought separately. When in doubt, ask your tailor before buying.

Is this estimate exact?

No — these are tailors' standard rules of thumb, not final cutting measurements. Body shape, fabric width and design all change the result, so confirm with your tailor.

Also searched as

how much cloth for panjabi · goj to meter converter · tailor kapor hisab · fabric width bohor meaning · dorji kapor calculator