Enter plot and floor sizes. A 50 × 100 ft plot with 2 × 2,500 floors (4,000 counted after 1,000 basement) gives FAR 0.8 — within limits.
Author: Abdullah AL Habib · Last updated:
- Plot area
- 5,000 sq ft
- Total floor area
- 4,000 sq ft
- Counted in FAR
- 3,000 sq ft
- Limit (max)
- 2
- Your FAR
- Within the limit
- Maximum buildable
- 10,000 sq ft
- Still buildable
- 7,000 sq ft
Your FAR is 0.6 — within the limit.
How this was calculated
- Plot = 50 × 100 = 5,000 sq ft.
- Floors = 2 × 2,000 = 4,000; minus 1,000 = 3,000 sq ft counted.
- FAR = 3,000 ÷ 5,000 = 0.6 (limit 2–2).
- Maximum = 2 × 5,000 = 10,000 sq ft.
Calculated at: https://xn--d6bxcvd.xn--54b7fta0cc/en/far-hisab/
The link includes the numbers you entered
How to use
- Enter the plot length and width in feet.
- Give the floor count and built-up area per floor.
- Leave out basement, parking or small balconies outside FAR; pick the building use.
| What |
Formula |
Example (50 × 100 plot, 2 × 2,500) |
| Plot |
length × width |
50 × 100 = 5,000 sq ft |
| Counted floor |
floors × per floor − exclusions |
2 × 2,500 − 1,000 = 4,000 sq ft |
| FAR |
counted ÷ plot |
4,000 ÷ 5,000 = 0.8 |
| Maximum |
limit × plot |
2.0 × 5,000 = 10,000 sq ft |
Usual FAR limits
| Type |
Plot |
Limit |
| Residential |
small ≤ 5,382 sq ft |
2.0 |
| Residential |
medium 5,382–10,764 sq ft |
1.5–2.0 |
| Residential |
large > 10,764 sq ft |
1.0–1.5 |
| Commercial |
— |
3.0–5.0 (by zoning) |
| Mixed-use |
— |
2.5–4.0 (by zoning) |
Examples
50 × 100 ft residential plot: 2 × 2,500 = 5,000; minus 1,000 basement-parking = 4,000 counted; FAR = 0.8 — inside the 2.0 limit. Still buildable: 10,000 − 4,000 = 6,000 sq ft.
30 × 50 ft plot, 4 × 1,400 floors: 5,600 ÷ 1,500 = 3.73 — over the 2.0 limit, redesign needed.
What to know in Bangladesh
- FAR is one condition only: setbacks, height, parking and fire-safety conditions apply together.
- Commercial/mixed limits vary by zone: they change by area even in one city — the calculator compares against the band top.
- The authority approves: the RAJUK/development-authority plan pass is final; this is an early estimate.
More: what counts and what does not
Counted: every floor’s built-up area (with walls), corridors, lobbies, stair rooms.
Usually outside: basement/parking, balconies/terraces ≤ 21.5 sq ft, parts outside setbacks, non-commercial podium/parking floors.
1 m² ≈ 10.764 sq ft.
Frequently asked questions
What is FAR?
Floor Area Ratio = countable total floor area ÷ plot area. The ratio of how much you may build on land.
What stays outside FAR?
Usually basement/parking, balconies/terraces ≤ 21.5 sq ft, parts outside setbacks, and (non-commercial) podium/parking floors.
What are the residential limits?
Small plots (≤ 5,382 sq ft): 2.0; medium: 1.5–2.0; large (> 10,764): 1.0–1.5. Commercial 3.0–5.0, mixed 2.5–4.0 by zoning.
Is this result final?
No. It is a BNBC-2020-based early estimate; the authority (RAJUK/city corporation) approves against its zoning and setbacks.
Also searched as
BNBC FAR limit residential · how many floors allowed on land · floor area ratio bangladesh · rajuk far calculation