Under a BRTA public notice, every motorcycle in Bangladesh needs a front number plate by 15 November 2026, and the owner has to get it made. Scooters use 200 × 100 mm, other motorcycles 285 × 50 mm; black Bangla letters on white, at least 20 mm tall. Type your number below, download a true-size PDF or PNG and take it to a plate shop.
Type the registration number in Bangla exactly as your registration paper shows it, e.g. ঢাকা মেট্রো-ল-১১-১২২৯. English digits are converted to Bangla automatically.
Check the preview and the letter height in mm. Use the slider for taller letters or add a black border if you like. Below 20 mm, download is disabled.
Download the PDF (exact size) or the 300-DPI PNG.
Print at 100% scale or 'Actual size', never 'Fit to page', then measure the print with a ruler.
Take the print to a number plate shop and have it made on stainless steel or aluminium.
Front number plate rules
Scooter
Other motorcycles
Size (length × width)
200 × 100 mm
285 × 50 mm
Layout
Two lines: district and class on top, number below
One line, e.g. ঢাকা মেট্রো-ল-১১-১২২৯
Letter height
At least 20 mm
At least 20 mm
Colour
Black Bangla letters on white
Black Bangla letters on white
Material
Stainless steel or aluminium
Stainless steel or aluminium
Nothing but the registration number may appear on the plate. The rear RFID plate stays as it is.
Printing at the exact size
Open the PDF and print with Scale: 100% or Actual size. ‘Fit to page’ or ‘Shrink’ makes the plate smaller.
Both plate sizes fit on A4 paper.
Measure the printed plate with a ruler: 200 mm long for a scooter, 285 mm for a motorcycle.
If you give the shop the PNG, use the 300-DPI file and tell them the real size in mm.
When does the front number plate become mandatory?
BRTA's public notice says every motorcycle must carry a manual front number plate by 15 November 2026. The owner arranges it, and BRTA warns of legal action against non-compliance. As of 24 October 2026 we found no extension of the deadline.
What size is the front number plate in Bangladesh?
Scooters: 200 mm long and 100 mm wide (tall). All other motorcycles: 285 mm long and 50 mm wide. Some news reports gave 285 × 50 mm for scooters too, but the table in BRTA's notice gives 200 × 100 mm for scooters. This tool builds the PDF at exactly these sizes.
How tall must the letters be?
At least 20 mm for letters and digits on both plate types. The tool shows the real height of the smallest letter or digit in mm and disables download if it falls below 20 mm.
Which font should the number plate use?
BRTA does not name a font; it only asks for Bangla letters and digits in black, at least 20 mm tall. This tool uses a bold, clear Bangla font (Baloo Da 2 Bold) that reads well from a distance.
What colours are allowed, and can I add a border or flag?
White background with black Bangla letters and digits. The notice says no other decoration or design is allowed. The tool offers an optional black border and an optional flag with a BD/BGD code on the left, but the flag and code are not a BRTA standard and may draw objections. For strict compliance keep only the number.
What material should the plate be? Is a sticker allowed?
Stainless steel or aluminium. A paper, sticker or plastic plate on its own does not meet the notice. The number can be painted or vinyl-cut onto the metal; give the printed template to a plate shop and they will make it.
How much does a front number plate cost, and where can I get one made?
A Kaler Alo report of 20 October 2026 puts a standard front plate at about Tk 250–300, and Tk 250–500 at some shops depending on size and material. In Dhaka, plate shops in Bangshal, Paltan, Mogbazar, Demra, Dholaikhal and Shyampur make them; with the rush it now takes one to one and a half hours. Prices vary by shop.
What is the fine for not having a front number plate?
BRTA's notice only says legal action will be taken; it gives no fine amount, and BRTA has not said which section of the Road Transport Act 2018 or what penalty would apply. See our traffic fine page for fines on other offences.
Do I still need the rear RFID number plate?
Yes. Under the Road Transport Act 2018 and Road Transport Rules 2022 the BRTA-approved retro-reflective rear plate with RFID is still required. The front plate is in addition to it and needs no RFID or BRTA seal.
Why are front number plates being made mandatory?
According to Prothom Alo, so that the AI traffic cameras on Dhaka roads can read motorcycle numbers from the front too. With only a rear plate, bikes coming towards a camera were hard to identify.
Has anyone challenged the rule?
Yes. On 18 October 2026 a Dhaka lawyer sent a legal notice to the BRTA chairman and the road transport secretary, arguing that Rule 36(10) of the Road Transport Rules 2022 exempts motorcycles from a front plate, and said he would go to the High Court without a reply within seven working days. We will update this page if the rule or deadline changes.
Why does it say my text is too long?
The full text does not fit on the plate at 20 mm height, which happens mostly with long district names or with a border and flag. Try removing the border or flag, drop extra spaces, and write the district the way your registration paper abbreviates it. Do not change the number beyond what the paper shows.
Is this an official BRTA number plate?
No. It is a template that follows the size and colour rules in BRTA's public notice, for a shop to make your plate from. BRTA does not issue or endorse it; if BRTA updates the rules, follow its latest instructions.
Is my bike a scooter or a motorcycle?
A bike with a flat footboard where you sit with your feet in front (Vespa, Honda Dio type) is a scooter. A regular bike you straddle over the fuel tank is a motorcycle. If unsure, check the vehicle class on your registration paper.
Also searched as
bike number plate size Bangladesh · BRTA number plate size mm · motorcycle front number plate · front number plate bike BD · 285x50 number plate · scooter number plate 200x100 · bike number plate maker BD · free online number plate maker · number plate design BD · Bangla number plate font · front number plate deadline 15 November