The formula
Total = (depth × per-foot boring rate) + (pipe length × per-foot price) + pump/head price + platform cost
- Boring: how many feet must be drilled, times the mason’s per-foot rate.
- Pipe: usually as long as the bore is deep; priced per foot for PVC or GI.
- Pump/head: a hand-pump head (RFL heads Tk 2,860–5,080) or a motor (0.5–2 HP submersible/centrifugal/jet).
- Platform: the concrete base around the tubewell plus labour (Tk 4,000–8,000 band).
Example
A 150 ft hand tubewell on the plain? Boring 150 × Tk 100 = Tk 15,000. Pipe 150 × Tk 120 = Tk 18,000. Head Tk 3,970. Platform Tk 6,000. Total = 15,000 + 18,000 + 3,970 + 6,000 = Tk 42,970.
150 ft with a 1 HP submersible pump: Boring 15,000 + pipe 18,000 + pump 11,800 (default price for a 1 HP submersible) + platform 6,000 = Tk 50,800. That is Tk 7,830 more than the hand tubewell because the motor costs more than a hand-pump head.
450 ft in the Barind, 2 HP submersible: Boring 450 × Tk 100 = Tk 45,000. Pipe 450 × Tk 120 = Tk 54,000. Pump Tk 15,800. Platform Tk 6,000. Total = Tk 1,20,800, with the Barind and arsenic warnings shown. Pump size is for an electrician or pump dealer to decide; 2 HP is used here only to show the arithmetic. The pump HP sizer gives a rough guide.
In all three, pipe is Tk 120 a foot and boring Tk 100 a foot. These are the calculator’s defaults, not verified market rates; your mason’s rate will change the figures.
What to know in Bangladesh
- Depth norms: shallow drinking-water tubewells run 50–150 ft; beyond about 500 ft counts as deep.
- Barind warning: some Barind villages find no water even at great depth — consult a local mason or DPHE before boring.
- Coastal warning: never install pipe on the coast without a salinity test; salty water may force a new depth or site.
- Arsenic: test the water for arsenic once struck (DPHE / union parishad).
Common mistakes and tips
- The defaults are only a starting point. Tk 100 a foot for boring is a widely quoted 2026 example and Tk 120 a foot for pipe is a placeholder the calculator fills in; neither is a confirmed national rate. Get two or three quotes from masons and shops.
- Boring and pipe are separate boxes. Ask what the mason’s rate covers. If pipe is included, put 0 as the pipe price; if not, enter both its price and its length.
- When you change region, check both depth and pipe length. The region only sets a starting depth (plain 150, Barind 450, coastal 600 ft). The depth at which a neighbour struck water is the real guide.
- A motor brings extra costs. Electric wiring, breaker, earthing and a water tank or pipe run are not in this estimate. For a tank see water tank; to gauge running cost from units, use the electricity bill calculator.
- It assumes water on the first try. The calculator assumes one bore finds good water in the right place. If it fails or the water is salty, boring starts again; leave some room in the budget for that.
- The arsenic warning always shows. Test the water once you strike it before using it for drinking.
- For the whole-house budget, treat the tubewell as one line and see house construction cost.
Vendor bands (approximate)
| Depth | Total boring band |
|---|---|
| 200–300 ft | Tk 15–30 thousand |
| 300–500 ft | Tk 30–55 thousand |
| 500–800 ft | Tk 55–90 thousand |
| 800–1,200 ft | Tk 90 thousand–1.7 lakh |
More: pipes, motors and government tubewells
PVC vs GI: PVC pipe is cheap, light and rust-free — the common choice for shallow household wells. GI pipe is strong and takes pressure, so it is safer for deep bores or where the pipe may take knocks. But GI costs more and can accumulate rust inside over many years. Put the shop’s current per-foot price into the calculator — prices move.
If you need a motor: under 200 ft of lift usually takes 1 HP, 200–350 ft takes 1–1.5 HP, and deeper lifts take 1.5–2 HP (always round up). September 2026 shop prices start around Tk 8,799 for a 0.5 HP submersible, Tk 11,400–12,300 for 1 HP, Tk 13,199 for 1.5 HP and Tk 15,800 for 2 HP. Motor selection, wire size, breaker and earthing all belong to a licensed electrician; never run a motor dry.
Government/subsidised tubewells: DPHE’s deep tubewell programme takes applications through the union parishad chairman; see the myGov portal for service details. Allocations, priority and conditions change year to year — the union parishad is the final source. This page’s calculator estimates private costs; no subsidy is deducted.