Footing Rod Calculator

Enter the footing size and spacing. A 5 × 5 ft footing at 6″ spacing with 12 mm bars takes ≈ 24.35 kg (≈ 25.57 kg with 5%, buy 3 rods).

ft
ft
Bar spacing

Centre to centre — usually 4–8 in for footings

Bar diameter (mm)
in

Footings touch soil, so usually 3 in of cover

%

Cutting and binding — usually 5%

৳

Total rod (with wastage)

25.57 kg

Number of bars
10 + 10
Each bar long
4.5 and 4.5 ft
Total length
27.43 m
Per metre
0.888 kg
Net weight
24.35 kg
Buy 12-m rods
3
In tons
0.026 t

This footing needs about 25.57 kg of rod (buy 3 twelve-metre rods).

How this was calculated
  1. Bars = (side − 2 × cover) ÷ spacing + 1. Length 5: (5 × 12 − 3 × 2) ÷ 6 + 1 = 10; width 5: 10 the other way.
  2. Length = 10 × 4.5 + 10 × 4.5 = 90 ft = 27.4 m.
  3. Weight = 12² ÷ 162.2 = 0.8878 kg/m; 27.4 × 0.8878 = 24.35 kg.
  4. With 5% wastage: 24.35 + 5% = buy 25.57 kg.

How to use

  1. Enter the footing length and width in feet.
  2. Pick the bar spacing (usually 4–8″) and diameter.
  3. Keep 3 in side cover; add a price per kg for the cost.

Footing bar formulas

What Formula Example (5 × 5 ft, 6″, 12 mm)
Bars each way (side − 2 × cover) ÷ spacing + 1 (60 − 6) ÷ 6 + 1 = 10
Each bar side − 2 × cover 5 − 0.5 = 4.5 ft
Total length both ways added 10 × 4.5 + 10 × 4.5 = 90 ft (27.43 m)
Weight metres × dia² ÷ 162.2 27.43 × 0.888 = ≈ 24.35 kg
To buy net + wastage%, divided by 12 m rounded up with 5%: ≈ 25.57 kg (3 rods)

Examples

5 × 5 ft footing: 6″ spacing, 3″ cover, 12 mm — 10 bars each way, 4.5 ft each, 90 ft = 27.43 m × 0.888 = ≈ 24.35 kg.

6 × 4 ft footing: same spacing and bars — 12 bars of 3.5 ft + 8 bars of 5.5 ft = 86 ft = 26.21 m ≈ 23.27 kg.

Weight by diameter (per metre)

Diameter kg/m One 12-m rod
10 mm 0.617 7.40 kg
12 mm 0.888 10.65 kg
16 mm 1.578 18.94 kg
20 mm 2.466 29.59 kg

What to know in Bangladesh

  • Mesh runs both ways: length and width both get bars at the same spacing — not one direction.
  • Measure inside the cover: bar counts and lengths are net of cover; counting cover overstates the steel.
  • Size comes from design: footing size and bar diameter follow soil tests and load calculations by the engineer.
More: fractions and hooks

When (side − 2 × cover) ÷ spacing leaves a fraction, take the whole number below and add 1 — that is how the calculator counts, keeping the last bar inside the cover.

Footing bar ends are often hooked; cover that extra length inside wastage (5% is usual).

Frequently asked questions

What is the footing bar formula?

Bars each way = (side − 2 × cover) ÷ spacing + 1. On a 5 ft side with 3″ cover at 6″ spacing: (60 − 6) ÷ 6 + 1 = 10. Each bar is as long as the side minus 2 × cover.

What is the weight formula?

Length (metres) × diameter² ÷ 162.2 = kg. A 12 mm bar is 144 ÷ 162.2 = 0.888 kg/m.

How much cover should I use?

Footings touch soil, so 3 in of side cover is usual. If the drawing says otherwise, use that.

How many 12-m rods should I buy?

Divide the total metres by 12 and round up (with wastage). The calculator shows this number.

Who decides the footing size?

The engineer fixes footing size and bars from soil capacity and column loads. This calculator only weighs those bars.

Also searched as

footing steel calculation · footing mesh bar count · isolated footing reinforcement estimate