Enter the slab size and get both methods side by side. A 50 × 30 ft, 5 in slab needs ≈ 2,081 kg by shortcut, ≈ 2,068 kg detailed (12 mm at 5″ spacing).
Both are estimates, not designs: use the shortcut for budgeting and the detailed figure plus the engineer’s drawing for buying.
Usual values: 5 in slab, 10–12 mm bars, 5–7 in spacing, 1–2% steel (usually 1.5%).
Don’t forget lapping: long roofs need joined bars — cover it inside wastage (5–10%).
Beams and columns are extra: this is slab mesh only; beams, columns, drops and stairs are separate.
More: where 222 and 532.2 come from
One cubic foot of mild steel (density ~7,850 kg/m³) weighs ≈ 222 kg — hence the shortcut multiplies the steel share of the volume by 222.
Per metre a bar weighs dia² ÷ 162.2 kg; with 1 ft = 0.3048 m that is dia² ÷ 532.2 kg per foot. Masons often say dia² ÷ 533; the result is almost the same.
Round fractional bar counts up (86.7 → 87) before adding 1 — the calculator always rounds up this way.
Frequently asked questions
What is the shortcut formula?
Volume × steel% × 222 = kg. A 50 × 30 × 5″ slab is 625 cft, so 625 × 1.5% × 222 ≈ 2,081 kg (2.08 t).
What is the detailed (spacing) formula?
Bars each way = (side ÷ spacing) + 1. At 5″ spacing a 50 ft side needs 121 bars of 30 ft and the 30 ft side needs 73 bars of 50 ft — 7,280 ft in total. Weight = feet × dia² ÷ 532.2.
How much does rod weigh per foot?
Dia² ÷ 532.2 kg. 10 mm is 0.188, 12 mm is 0.271 and 16 mm is 0.481 kg/ft.
Will the two methods agree?
Roughly, never exactly. The shortcut is a quick estimate; buy on the detailed figure — this page shows both so you can cross-check.
How much wastage should I add?
5–10% for lapping, cutting and binding. The calculator adds wastage to the detailed figure only; the shortcut is already approximate.
Does this include beams and columns?
No — slab mesh only. Beams, columns, stairs and extra laps come from the structural drawing. The engineer's bar bending schedule is final.
Also searched as
slab steel calculation · roof casting rod estimate · rebar for 1500 sq ft roof · steel percentage slab method